Baltimore Washington Eye Center Advances Cataract Surgery Through Innovations In Technology

PressRelease – Cataract surgery requires lens removal and Baltimore Washington Eye Center has made the commitment to having the technology best suited for optimum outcomes by incorporating The Alcon CENTURION Vision System to perform that portion of the surgery for our patients.

Baltimore, MD – “Our ongoing commitment to providing world class cataract surgery to Baltimore and D.C. patients was recently demonstrated by incorporating the Alcon LensSx Femtosecond Laser into our eye surgery center so that our cataract surgeons can offer patients laser cataract surgery and lens implants in a more precise, gentle and reproducible cataract operation. Now, we’re taking the next step to further refine safety and outcomes for patients by using the Alcon CENTURION Vision System to perform the actual lens removal portion of the surgery,” explained Arturo Betancourt, M.D., Medical Director and Cataract Surgeon at Baltimore Washington Eye Center.

Corneal Specialist and Cataract Surgeon Brad Spagnolo, M.D. further explained, “This is the only lens removal system to utilize Active Fluidics which is an innovation that allows us to create and maintain a consistent and stable fluid environment inside the eye while performing the actual cataract removal or phacoemulsification portion of the procedure. Maintaining control over the fluid environment during every moment of the cataract procedure helps us to further improve safety and outcomes for our patients.”

The Baltimore Washington Eye Surgery Center is a comfortable, close to home ambulatory surgery center dedicated to bringing world class eye surgery to patients from the greater Baltimore and Washington, D.C. region. We are fully accredited by the Accreditation Association for Ambulatory Health Care (AAAHC) and licensed by the State of Maryland and Medicare.

When you visit Baltimore Washington Eye Center please ask us any questions you might have about cataracts, lens implants or laser cataract surgery or visit us at or or follow our eye care blog.

For additional information, contact:
Jeffrey Trimmer, Baltimore Washington Eye Center, 200 Hospital Drive, Suite 600, Glen Burnie, Maryland 21061, JTrimmer ( @ ) BWEyecenter dot com, 800-495-3937 dot

SOURCE: Medical Management Services Group, L.L.C.

Greatest Tips For Hassle-Free Presostat Electronic Brio 2000 Mt Experiences

How much do you really know about your home’s presostat electronic brio 2000 mt? If so, wouldn’t it be nice to build upon your knowledge? Do you possess the skills needed to perform basic repairs? If you don’t know the answers to the preceding questions, it’s time to give this article a read./p>

If a plunger is ineffective, you might be able to do the trick with a bucket of warm water. Do this every time the water level gets too low.

Do not pay your plumber until they finish the job. You may need to make a small down payment before the job has begun, but you never want to pay the entire amount until you are certain the job was completed to your satisfaction. If you pay everything up front, you have no recourse if the plumber doesn’t finish the job or doesn’t do it correctly.

If you have a frozen pipe, turn on the nearest faucet so the water has an escape route when the pipe starts to thaw. This assists you in relieving pressure within the pipe, and could stop any bursting from occurring, which can prevent additional damage to your home.

If there is unwanted water draining into the dishwasher, it is most likely because of the hose to the kitchen sink being installed improperly. The water will not drain into the dishwasher from the sink if it is configured in an uphill and downhill position.

If your toilet happens to be clogged, and the plunger is not working, you can pour a bucket of hot water down the toilet, but be sure to pour it from a height that is waist level or above so you do not flood the bathroom. Repeat this as many times as necessary until your clog is gone, and you can flush normally once again.

To lessen the chances of toilet problems, do not use as a place to put trash. Don’t flush paper towels, diapers, cotton balls, tissues or any other materials besides toilet paper. These items don’t dissolve and can cause clogs. Additionally, use the minimum amount of toilet paper required to clean up after you are done.

Clean the aerator to adjust water pressure issues which result from sediment build up. After removing the aerator, disassemble it, and use a small brush that’s been dipped in vinegar to clean it. After the aerator is thoroughly cleaned, rinse it under clear water, put it back together, and attach it to your faucet again. Once the aerator has been cleared, your water pressure should improve.

Don’t run the water while putting food through your garbage disposal. Water doesn’t actually help to wash items down the garbage disposal. In some cases, water can actually cause garbage to become lodged in awkward places, and contribute to future problems.

Because you’ve read over the above article, you should feel confident and excited about doing some of your own presostat electronic brio 2000 mt. This article has given you advice that will be efficient for your needs. If they don’t, consider other options until you’re satisfied with the results.

The Impact Of Barcode Scanner Technology On Businesses

Barcode technology has become omnipresent and is being used in every aspect of businesses to prevent errors caused by human intervention, and enhance overall efficiency across applications. Processes like inventory control have seen revolutionary changes since barcode help to track all product details and update inventory levels at all times. Barcodes are a universal feature now and do not attract attention anymore. They are in use in offices and commercial establishments, hospitals and warehouses, hotels, government agencies and all organizations required to keep an inventory of products and services.
Customers and clients seldom stop to consider the working of barcode scanner technology. No one thinks of the meaning of the parallel black and white lines, the light beam flitting across them and how they transmit the same data found on the label. The only certainty in everyone”s mind is the accuracy of the information and the fast pace of transactions.

The rationale behind all this is manner in which barcode technology works. Any item that is barcoded has been identified, and all relevant details about it stored in the system or the host computer. The information coding takes place in a special barcoding language, and it is the job of the barcode scanner to decode that information and present it in a human readable form.

Barcode languages are simple since they contain symbols that are like a string of bars of different sizes, some short, some long, and interspaced with unequal spaces shown in white. Thus it appears as a series and every part of the series stands for a certain number of characters. Special barcode software eases the whole process of storing information and later decoding it.

Hence barcode software is the critical part of barcodes and barcode scanning processes that eases the working of the whole system. Specialist software programmers use barcode software to keep an inventory list of their products. This is accomplished by entering the name of the product, and assigning a unique product identification by generating a barcode for it with the aid of an advanced database system that stores all the product information. This information is the key to all inventory tracking, updating records, and each time the barcode scanner scans the barcode, its details are immediately extracted from this database.

Barcode scanners are designed to read the barcode label with the aid of photo sensors that are fitted inside. The sensors are responsible for deciphering each scanned barcode with its spaces, parallel bars of different length and widths. Then this is matched to the corresponding information in the database.

Led High-power Street Lamp Technology

LED street lamps to large-scale application, the general notion that still needs some time,. but I really think that LED lights technology matured. Welcome to correct me.

To say LED street lamps (which is actually all LED lighting) is not reason for large-scale application are the following three:
1, LED street lamps light efficiency has not yet reached to the level of sodium;
2, the life of LED street lamps;
3, LED street lamps photometric is not ideal.

Talked about LED street lamps, many people will pointed out that LED of display color index LED controller than sodium of display color index high many, and can reduced LED street lamps of as of standard, appeal separate for LED street lamps amendment standard, actually, from macro Shang see sent hope Yu amendment standard is does not reality of, and I think existing of road lighting standard no may also no necessary amendment. to makes LED replaced other light became reality, on only by LED lighting area of people themselves efforts has.

Luminous efficiency problems:
First, sodium of light effect does is high, I see some better of sodium products units power lumens number are in 110 above, and currently do of good of LED also on in 90Lm/W around, also no energy saving. but, if comparison lamps of efficiency, conclusions on does not as has. because general light are is 360 of Omni-directional uniform glow, and LED glow has directional, usually is 180 of within, so difference, Street light is not the same. made of sodium lamp or conventional light Street lamp lamps light efficiency is typically around 60%, LED street lamps can more easily reach 90%. According to the weighted, effective light for the 66Lm/W sodium street lamps and LED Street lamp light can effectively reach 80Lm/W.

Second, since it is a street lamp, is of course the only fall on pavement of light is needed, that will further see the flux on the road, to minimum national standards H=Weff, for example, better utilization coefficient of sodium lamps of 0.3,[url=]LED controller [/url] if LED utilization coefficient of 0.8, then to the current level of LED luminous efficiency, A 110W of LED street lamps on full can replaced 250W of sodium has, if considered to actual engineering cost, factors, usually in accordance with H=1.2Weff to design words, to 100W of LED street lamps replaced 250W of sodium is at this stage on can implementation of. to reached 60% so of energy saving level has has enough of energy saving effect has. to reached 0.8 of using coefficient, this is see LED street lamps design personnel distribution light of Foundation, actually is also does not difficult.

Life issues:
If was told you, they of LED lamps of life has 100,000 hours or 50,000 hours, and 30,000 hours, you and to hear is not to believe, but remember asked asked how are of, if said is known of, that you heard had even has, if told you is measured of, must then asked about is to how many hours data for Foundation of, because now certainly no anyone for had to million hours for meter of test, because this impossible, future also does not has foolish for so of test, Because it’s not needed. 1000 hours of data will tell you, you don’t count, because a lot of LED tube luminous efficiency is increased in 1000 hours. LED controllers and of course, when you tube as well. Now international passage of life test time is 1000 + 5,000 hours test, yiqian 1000 hours for stability time, Hou 5,000 hours data for calculation life of pursuant to, over 5,000 hours life in accordance with 5,000 hours within of intended-in curve outside push calculation. we actual test of 1+5 thousand hours of light failure for 2.2%, and is linear of, if considered some allowance, we will products standard will for 5,000 hours light failure for 2.5%, so outside push 50% light effect of life will is 100,000 hours, 70% Photosynthetic efficiency of life expectancy of 60,000 hours.

But, regardless of is in accordance with 50% also is 70% calculation life are is does not important of, actually most science of is for many national by used of method is maintained as of does not below standard provides of maintained as of of life for quasi. such as GB provides fast road of maintained average as of for 20Lx, if early loaded street lamps of average as of for 30Lx, is should to 66% light effect calculation life, so calculation of life is is 66,000 hours. LED controller if plus midnight lamp control, Real time on up to 100,000 hours. of course, can we really achieve this time, may have to wait 25 years before you can know.

Non Conductive Coating Technology Ncvm

Electroplating technology is a functional finishing technology. Its alloy coating has excellent wear resistance, corrosion resistance, coating thickness uniformity and high density. It has a wide range of applications in electronic products. With the rapid development of the electronics industry, the high demand for electroplating technology increases. Many new technologies, new products, new techniques are constantly emerging.
NCVM also known as discontinuous titanium dioxide coating technology or non-conductive plating technology. It is from one edge of the ordinary vacuum plating of high-tech. Vacuum plating, referred to as the VM, it is abbreviation of vacuummetalization. It refers to the metallic materials under vacuum conditions, the use of specific chemical and physical means of organic conversion, so that the metal converted to particles deposited or adsorbed on the surface of the plastic material to form a membrane, which is our so-called coating. The conductive vacuum plating is also known as NCVM. The process is higher than ordinary vacuum plating, the processing process is much more complex than the ordinary process.
NCVM is plated out of metal and insulating compounds, film, using each other discontinuous features, get to the final appearance of the metallic finish and does not affect the effect of the wireless communication transmission. First to achieve the non-conductive, to meet the normal use of wireless communications products; Second, we must ensure that the metallic finish this important appearance requirements; combined with UV coating and the coating layer, the ultimate guarantee of the physical properties and weather resistance of the product to meet customer needs . NCVM can be applied to a variety of plastic materials, such as PC, PC + ABS,, the ABS, PMMA, NYLON, such as engineering plastics, it is more in line with environmental protection requirements of the production process, alternative technologies for electroplating products of the chrome-free (Non-Chrome), applicable to all the required surface treatment of plastic products, especially suitable for signal transmission and reception of 3C products, especially in the vicinity of the antenna cover, such as Mobile-Phone, PDAs, smart phone, GPS satellite navigation, bluetooth headset.
The main features of NCVM is a combination of the characteristics of the traditional vacuum coating technology, the new coating technology, new materials, to make the different colors of the ordinary neodymium fluoride vacuum plating metal play the beautification function of the workpiece surface. NCVM technology system finished by high-voltage table tens of thousands of volts of high voltage test is not turned on or not breakdown. It is precisely because of its non-conductive when the recipient or the emission signal of the mobile phone or Bluetooth headset, the electromagnetic fields generated by the conductive coating of the stocking, which does not affect the phone’s RF (radio frequency) performance and ESD (electrostatic discharge) performance that makes wireless products to achieve better received signal, no noise, nor will it have any impact on the human body. From the point of view of electrical properties, it can be tested by conducting tests and electronic interference. From the vacuum coating, it can also ensure normal physical and weathering tests, such as adhesion, abrasion resistance, alcohol resistance to artificial sweat and hot and humid storage. Communications products chassis NCVM process, the antenna module without re-design the circuit ground to the board, thus saving on the antenna module detection, and cost savings; the appearance of the metallic finish of the products is relatively strong, thereby increasing the technological content of products, increase the added value of the product.
In addition, NCVM can make the plastic with metallic and semi-translucent control. It reflects the metal texture and light penetrating. In the NCVM process, it often uses the translucent or semi translucent characteristics to make the product changeable. Then the appearance becomes more beautiful. Source:

Yudhvir Malik, Financial Commissioner & Principal Secretary, Electronics & Information Technology,

tv.eletsonline.com

Please be the part of our Upcoming Event FIPS

Elets – A platform for disseminating creative ideas on ICT

Elets Technomedia is a technology media and research company that focuses on ICT in government, education, healthcare, agriculture and rural development sectors. Our mandate is to provide effective information on latest development in different ICT tools, techniques and their applications across our verticals through premier print publications, online portals and premier events, seminars, conferences and summits. Elets has created a name for itself as a technology media and research vendor of choice.

Strategies

To strengthen and facilitate knowledge sharing platforms engaging with partners across the globe through International conferences to provide cross-cultural grounding to stakeholders and participants To provide stakeholders with a platform to share models of best practice, knowledge and experience on a range of issues in the domain of ICT in Governance, Education, Health, security, Urban and Rural Development To mobilise the communities towards creating a digitally informed knowledge society based on shared understanding

Elets Focus Areas

Elets provides an unmatched versatility for working with multiple partners and consultants to mutually share knowledge. With a vision to provide effective information on latest development in different ICT tools, techniques and their applications across various verticals with focused reference to governance, education and health, we

a) bring niche monthly publications;

b) provide knowledge exchange fora and

c) conduct research projects, primarily through Events & Conferences.

Short Process Of Powder Metallurgy Technology

Technology of powder metallurgy parts near net shape powder metallurgy workers has long been one focus of the study subjects. Over the past decade, the study of new technology, new technology after another. These new technologies, the emergence of new technology to solve the short-flow low-cost powder metallurgy materials forming problems, greatly contributed to the rapid development of powder metallurgy parts. Currently, powder metallurgy parts manufacturing technology development is to increase density, reduce costs and complexity of high-precision near net shape parts mouth.
In 2000, Germany’s Fraunhofer Institute has developed one of these are known as the flow temperature and pressure of the short process of low-cost near-net shape technology. The temperature and pressure process technology-based and combines the advantages of metal injection molding technology. By improving the mobility of mixed powders, filling ability and formability, can 8O ~ 130 , in the traditional press on the precision forming of parts with complex geometries, such as the vertical direction with a groove with the suppression of the hole and threaded hole and other parts. 2 without the need for subsequent machining. Flow temperature and pressure forming technology not only to overcome the traditional powder metallurgy forming a complex geometry in the gaps, but also avoid the high cost of metal injection molding technology is a great potential of new technology, has a very broad application prospects.
Flow temperature and pressure forming a new type of powder metallurgy parts, as near net shape technology, its main features can be summarized as follows: 1) forming parts with complex geometry flow using temperature and pressure can be directly formed with grooves perpendicular to the direction of repression, holes and screw holes and other parts, while the use of the shape of the cold manufacture of such parts is very difficult or even impossible, manganese powder the general need to complete the subsequent machining, CNC press to realize that the use of complex and precise movements , can only produce a relatively simple type of parts. Fraunhofer researchers used a special mold, the T-hole, hole, L-shaped cavity mold hole has been studied and successfully prepared a T-shaped parts. The results show that the well-mixed powder flow is sufficient to avoid cracks in the corner. Fraunhofer researchers have also used the shape with a slight taper to successfully direct the punch forming a deep blind hole parts, blind holes and wall thickness of the high rate of up to 3 to 7, the changes in wall thickness in the range of 1 ~ 3mm . Flow temperature and pressure can also be precision ground forming threaded holes. With the external thread of the bolt with a core mold after compaction, it will tighten the bolt out from the semi-finished products, and then sintering can be obtained thread. According to shrinkage by selecting the appropriate core diameter of the bolt thread can be suppressed without the required 2 machining.
2) The compacts of high density, density, temperature and pressure than the uniform flow of powder loading density as high, so after the semi-finished products by the temperature and pressure can reach very high density values. In addition to density, the powder flowability as well, forming parts and more uniform density. Or use a simple model red (no auxiliary floating red multi-axis model) can be multi-step forming of powder metallurgy parts.
3) the adaptability of materials Fraunhofer researchers conducted a variety of metal powder flow of warm compaction studies, have made a more significant results, including low alloy steel powder (Distolay AE), stainless steel 316L powder, silicon powder pure Ti powder and WC-Co hard metal powder. Flow temperature and pressure process in principle applicable to all the powder system, the only requirement is that the powder sintering must be good enough to eventually reach the required density and performance.
4) to simplify the process, reducing costs forming parts using conventional powder metallurgy method to suppress in the direction perpendicular to the grooves, cross holes and other shape, need to design very complex molds or 2 times after sintering machining to complete. Although injection molding technology in the shape of forming part of the complex and almost without any restrictions. However, due to large number of added binder, nickel powder in the heating process in part because of the influence of gravity to deform. Therefore, it often requires an additional more complicated and more expensive binder removal process, making the injection molding of high cost than conventional powder metallurgy technology, so the injection molding of parts may not be able to meet its design features to replace the conventional powder metallurgy parts to the application of injection molding technology has been somewhat restricted.
The flow temperature and pressure forming technology, either directly without the need for complex geometries 2 subsequent machining; the other hand, the flow temperature and pressure forming process, the use of a special binder and lubricant content is moderate, the configuration of the hybrid powder has a high viscosity and critical shear strength, the heating process does not occur in the deformation, which can be directly removed during sintering binder. Thus, the traditional powder forming process and injection molding process compared to current techniques for temperature and pressure forming of complex geometry parts, the only simplifies the production process, but also significantly reduces manufacturing costs.

Get Your Hands Comfortable With Touch Technology

Today, Touch screen technology is very famous in the areas of computers along with a phone where the work of the hands is totally replaced by mouse along with pen and fingers. It is the best way to improve the human along with computer interactions. Apart from that in computer world this technology has replaced the mouse along with keypads which are used in the computer world.

There are four types of Touchscreen Technology which includes:-

Resistive Technology This technology is best in offering resolution along with durability part which is further used in different applications along with environments. In resistive technology you will find 2 types of technology one is Matrix one and another one is Analogue one. This technology is played best part in a cost effective field along with durability part.

Capacitive Technology- In this type of technology you will find the touch pad which is having the electrodes of two layer grid which is connected to integrated circuit which is placed on the back side of the pad. As this is mounted with 2 layer grid the upper part is vertical electrodes and the lower layer is horizontal electrodes. The integrated circuit measures the mutual capacitance of both the horizontal along with vertical electrodes when the human finger is placed on the intersection part.

Surface Acoustic Wave Technology- With this type of technologyyou will come across with more advanced screen. This technology is having 2 transducers which are doing the work of transmitting along with receiving on the axis of X and Y panel of the touch. In this Technology glass is used which is called Reflector. It involves the simple process where the controller sends the important information/signals to the transmitting transducer which is turn is received by the receiving transducer who will convert the information/signals into ultra-sonic waves which is turning emits to the reflector which is placed on the edge of the panels. This technology is best in terms of image clarity along with the best light transmission.

This technology is recommended for Amusement Parks along with ATMs, financial and banking institutions where the work is on a daily basis.
You can also come across with 4-wire touch screens which is famous for high quality along with a cost effective method used in many applications. The otherfeatures of4-wire touch screentechnology is

Fast response in case touched by any object

Benefits of liquid resistance

Quality in services

Benefits of low cost method

Nowadays many phones along with computer companies are making the use of resistive technology because of its main features in the computer along with phone world. Thus it makes the touch screen technology very effective.

Bachelors Of Science ( Information Technology )

COURSE COMPOSITION OF THE THREE YEAR INTEGRATED B.Sc. (Information Technology) DEGREE COURSE (3 Years Degree Course) (Total 6 Semesters, 2 Semesters per year)

This is three years degree course of the University of Mumbai giving scope in specialization in the field of Information Technology And admissions to the course will be conducted as per the guidelines and schedule announced by the University of Mumbal.
A Candidate for being eligible for admission to the Bachelor of Science Information Technology Degree Course should have passed he H.S.C. (Std.XII) Examination conducted by the Maharashtra State Board of Secondary and Higher Secondary Education or its equivalent with MATHEMATICS & STATISTICS as one subject and should have secured not less than 45% marks in aggregate and 40% marks in aggregate in case of reserved candidates, at one and the same sitting.
Candidate who have passed Diploma (Three years after S.S.C. X th Std.) in Information Technology/Computer Technology / Computer Engineering/Computer Science/Electrical, Electronics and Video Engineering and Allied Branches /Civil and Allied branches are eligible for direct admission to the Second year of the B.Sc. (I.T.) degree Course. However, the Diploma should be recognized by the Board of Technical Education or any other recognized Government Body. Minimum marks required 45% aggregate for open category candidates and 40% aggregate for reserved category candidates.
OR
Candidates with post HSC-Diploma in Information Technology/Computer Technology/ Computer Engineering. Computer Science. And Allied branches will be eligible for direct admission to the Second Year of B.Sc. I.T. However, the Diploma should be recognized by the Board of Technical Education or any other recognized Government Body. Minimum marks required 45% aggregate for open category candidates and 40% aggregate for reserved category candidates Students coming from any other State Board in India will also be admitted to F.Y.B.Sc.(I.T.) Class . However, they will be required to produce Provisional Statement of Eligibility obtained from the Eligibility Section, University of Mumbai, Vidyanagari , Kalina or they will be admitted Provisionally subject to the Submission of Eligibility Form and the Demand Draft towards the Eligibility Fees as per the University Circular No. Elg /Cir/(39)/561 /2008 dated 22-5-2008.

Websites For Artists The Impact Of Information Technology To The World

Information technology soars high with its never ending commitment – to provide the highest quality technology-based services in the most cost-effective manner. It changed how the world looks like as time passed by. It provides support for audio/visual, computer, multimedia, voice and video and even websites for artists.

Information technology can be found everywhere. From the newspaper we read everyday to the most advanced gadget we use, all of them are products of information technology.

Graphics and Animations

Computer graphics and animations are working hand in hand to bring the most modern effects in cinematography. 3D or the three-dimensional image is an example of how information technology evolves in the world of film making. Walt Disney, Universal Studios, and Pixar Animation are examples of companies that produce films in 3D Formats. Artist and directors made their lives easier in filming movies and putting up websites for artists through the help of information technology. Now, they can film a scene inside a small space without going to a distant place and can create a site that will look so authentic.

Photography

Information technology is also making its name in world of photography. Photos are more vivid compared in the past. Thanks to the newly-invented camera lenses that generate images in full HD.

Entertainment

Websites for artists are connected to entertainment as well. Music, an art form whose medium is sound, is the most popular area of entertainment. Just like other fields, the world of entertainment flocks its wings with information technology. 3D surround sound and the most common sound format Dolby Digital are products of information technology. Movies use these sound formats to deliver a more fascinating sound experience like no other.
Music tracks are now developing with the help of information technology. From a phonograph disc which plays mono sounds to a highly digital stereo. Tracks are now recorded in compact disk that delivers good sound quality.

Medicine

Medicine is the most important field of all. It is where IT developers give their time to create new inventions to help save lives. IT specialists are working double to provide medicine advancements. An example of this is the latest gadget that mimics embryo experience that shows promise for infertility treatment.

The World Wide Web

The World Wide Web is the information superhighway; the trade of all trades. This is where everything can be found; websites for artists most specifically. Billions of information stream endlessly here.

Information technology is found everywhere, committed to provide excellence in many fields.